The program will install Lasercut, the drivers for the USB dongle and the drivers for the laser cutter. Like most older programs Lasercut prefers to run from the default paths. The ‘Lasercut53′ type is a standalone version of Lasercut which can be used in demonstration mode without the need for the softdog dongle. Install Lasercut using the default settings. Run the “Setup.exe” program from within the LaserCut 5.3 folder, this will start the installation of Lasercut 5.3
In a typical install, all the required drivers will be set up as part of the Lasercut Installer, the additional drivers are only provided for completeness. The driver to connect directly to the laser cutter. An additional driver for the USB dongle if you are using a 64-bit version of Windows 7 This is used to prepare the cutting files before sending them to the laser
You can Download LaserCut 5.3 from this link - DownloadĪfter downloading extract the files from the zipped archive to a new directory. Mainly LaserCut inherit to run laser machines with controller cards MPC6515 and MPC6535 Laser Cut very old but still very useful software to control laser machines. In this tutorial, I’ll show you how to download LaserCut 5.3 and Install it.
